Sealers

SK-P250 VOC

SK-P250 VOC is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of surfaces. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete.


SK-P250 VOC is U.V. stable for use in exterior applications, cures rapidly, and is easily recoated with both solvent-based and water-based polyurethanes. When used as a finish coat, this material gives a hard, high gloss surface that offers excellent stain resistance and easy cleanability. Compared to solvent-based acrylic sealers, SK-P250 VOC offers substantial improvements in initial gloss, gloss retention and overall performance.

SK-P250 VOC is available in a satin finish if a lower gloss is desired. A special version of this material is available to meet the 50 grams/liter VOC limit in California. SK-P250 VOC has been designed for use over concrete, acid stained surfaces, and various types of architectural concrete. Its performance as a paver sealer is unexcelled. It is especially suitable over acid stained concrete because it is unaffected by pH drifts that can affect the adhesion of other types of primers. When used over acid stains or integrally colored concrete, it gives color enhancement similar to solvent acrylic sealers.


SK-P250 VOC can also be used as a tie coat over difficult to adhere to surfaces such as polyester urethane and solvent based acrylic sealers. When used as a finish coat in vehicle areas, it resists tire tracking and provides easy soil release. Although abrasion resistance to heavy foot traffic far exceeds single component materials, the best performance in these areas is achieved with polyester urethanes such as SK-P100, SK-P100 VOC or SK-P501.


Colors & Finishes

Clear

Satin Finish


Packaging

1.5 Gallons

15 Gallons


SK-P250 VOC PART A

SK-P250 VOC PART B

SK-P250 VOC Product Datasheet

SK-P250

SK-P250: Your Solution for Acrylic Sealer Problems


Flooring failures can result in significant financial setbacks for the contractor and end-user. In addition to the repairs, major issues can force businesses to shut down operations, potentially costing hundreds of thousands or even millions of dollars.


SK-P250 is a high-performance architectural concrete sealer that solves the performance problems common to acrylic sealers and reduces the need and frequency of reseals and repairs.

The use of special solvents and adhesion promoters gives SK-P250 exceptional penetration and adhesion to minimally profiled concrete. It can be easily recoated with solvent-based or water-based polyurethanes.


Your solution: SK-P250, a uniquely formulated two-component acrylic urethane that is exclusive to Arizona Polymer Flooring and Super-Krete Products and is rapidly becoming the high performance alternative to conventional solvent acrylic sealers.


The SK-P250 Advantage


Double the wear resistance in high foot traffic areas, such as malls, casinos and resorts

Outstanding performance in vehicle areas

High initial gloss and unequaled gloss retention in exterior applications

Superior stain and chemical resistance in comparison to conventional acrylic

Chemical cross-linking gives better water resistance and less whitening problems

Extended time between recoating

10 year field history

High-Performance Sealer Yields Long-Term Savings


Flooring failures can result in significant financial setbacks for the contractor and end-user. In addition to the repairs, major issues can force businesses to shut down operations, potentially costing hundreds of thousands or even millions of dollars. SK-P250 is a high-performance architectural concrete sealer that solves the performance problems common to acrylic sealers and reduces the need and frequency of reseals and repairs. The use of special solvents and adhesion promoters gives SK-P250 exceptional penetration and adhesion to minimally profiled concrete. It can be easily recoated with solvent-based or water-based polyurethanes.


SK-P250 Uses & Applications


SK-P250 is ideal for sealing conventional concrete, acid stained surfaces, overlays, pavers and all types of decorative and architectural concrete. SK-P250 can provide color enhancements similar to solvent acrylic sealers, and it can be used as a tie coat over surfaces that are difficult to adhere to, such as polyester urethanes. When used as a finish coat in vehicle areas, it resists tire tracking and provides easy soil release. Although abrasion resistance to heavy foot traffic far exceeds single component materials, the best performance in these areas is achieved with polyester urethanes such as SK-P100, SK-P100 VOC or SK-P501. APF has developed SK-P250 Systems for projects with demanding requirements like those in the residential, restaurant, retail and hospitality industries.


Colors & Finishes

Clear

Satin Finish


Packaging

1.5 Gallons

15 Gallons


SK-P250 PART A

SK-P250 PART B

SK-P250 Product Datasheet

S-8600 CLEAR SEAL PLUS

Clear Seal Plus is a deep penetrating acrylic/urethane sealer brings a semi-gloss finish and durable protection to old and new surfaces. Clear Seal Plus is the perfect choice for sealing heavy foot traffic areas and in residential interiors.


Coverage Rate

Approximately 300 sq. ft./gallon


Colors & Finishes

Only available in clear


Packaging

1 Gallon Bottle/4 gallons per case

5 Gallon Pail/36 pails per pallet

55 Gallon Drum/4 drums per pallet


S-8600 Clear Seal Plus SDS 2016

S-8600 Clear Seal Plus™ Product Datasheet

S-8500 CLEAR SEAL

Clear Seal is a water-based sealer which provides a semi-gloss to matte finish to new and existing surfaces. When Clear Seal is spray applied, Clear Seal penetrates and brings new life and durability to pigmented and un-pigmented concrete and masonry. Clear Seal is for very light traffic areas only.


Coverage Rate

Approimately 300 sq. ft./gallon


Colors & Finishes

Only available in clear


Packaging

1 Gallon Bottle/4 gallons per case

5 Gallon Pail/36 pails per pallet

55 Gallon Drum/4 drums per pallet


S-8500 Clear Seal SDS 2016

S-8500 Clear Seal™ Product Datasheet

S-8400 SUPRA-SEAL™ PLUS

S-8400 Supra-Seal Plus is a clear, solvent-based acrylic designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces.


S-8400 Supra-Seal Plus is based on a hard acrylic polymer that produces coatings that provides good gloss, stain-resistance and cleanability. Adhesion to properly prepared cementitious surfaces is excellent, and the material is completely non-yellowing. This product brings out the rich, natural beauty of the substrate.


Coverage Rate

200-300 sq. ft. per gallon


Colors & Finishes

Only available in clear


Packaging

1 Gallon

5 Gallons


S-8400 Supra-Seal™ Plus Product Datasheet

S-8400 Supra-Seal™ Plus SDS

S-8350 SUPRA-SEAL™ VOC

S-8350 Supra-Seal™ VOC is a clear, solvent-based acrylic designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces.


S-8350 Supra-Seal VOC is based on a hard acrylic polymer that produces coatings that provide good gloss, stain-resistance and cleanability. Adhesion to properly prepared cementitious surfaces is excellent, and the material is completely non-yellowing. This product brings out the rich, natural beauty of the substrate.


S-8350 Supra-Seal VOC is produced to meet the 100 gram/liter VOC California standard.


Coverage Rate

200-300 sq. ft. per gallon


Colors & Finishes

Only available in clear


Packaging

1 Gallon

5 Gallons


S-8350 Supra-Seal™ SDS

S-8200 TOP SEALER

Super-Krete S-8200 Top Sealer is a non-toxic surface sealer which provides highly effective protection to stucco, rockscapes, brick and sandstone surfaces. Top Sealer completely seals most concrete, brick, wood, and sandstone surfaces with a natural look.


Coverage Rate

Approximately 300 sf/gallon


Colors & Finishes

Clear


Packaging

1 Gallon Bottle

5 Gallon Pail

55 Gallon Drum


S-8200-Top Sealer™ Product Datasheet

S-8000 URE-TOP-KOTE™

Super-Krete Ure-Top-Kote is used as a protective clear finish for high use applications over portland cement, masonry, wood, and asphalt surfaces.


Ure-Top-Kote™ is a water-based acrylic-urethane copolymer emulsion fortified by urethane crosslinkers to create a semi-gloss, clear protective shield over Super-Krete coatings and other surfaces when an extra heavy-duty surface sealer is required.


Super-Krete Ure-Top-Kote is used over concrete and masonry to produce a sealing system that penetrates the surface for a tenacious bond on interior and exterior applications where vehicular traffic IS NOT permitted.


Coverage Rate

One (1) gallon of Ure-Top-Kote will cover approximately 150-250 sq. ft. when applied over porous surfaces. Second coat coverage will be approximately 300 sq. ft.


Packaging

1 Gallon Units/4 per case

5 Gallon Pails/36 per pallet

55 Gallon Drums/4 per pallet


S-8000 Ure-Top-Kote SDS 2016

S-8000 Ure-Top-Kote™ Product Datasheet

CEM-SEAL

Cem-Seal is a water-based acrylic emulsion used in a variety of decorative concrete applications. It is available in both clear and pigmented formulations, dries quickly, and is high in solids for single component emulsion type materials.


Cem-Seal forms hard coating films, resists blushing, and provides excellent resistance to yellowing in exterior applications. Pigmented Cem-Seal is used as a color coat over polymer concrete and spray applied decking.


Clear Cem-Seal was designed as a fast drying build coat in color chip flooring and as an economical sealer over polymer concrete in light duty applications.


It is an excellent primer on polymer concrete when two component polyurethane or polyurea/ polyaspartics are used as finish coats.


Coverage Rate

Approximately 300 sf/gallon


Colors & Finishes

Clear

Cardinal Red

Charcoal

Chestnut

Coffee

Eggplant

Indigo

Jade

Midnight Blue

Moss

Pear

Pumpkin

Purple

Russet

Saddle Brown

Sepia

Tawny

Custom Colors are available upon request for an additional fee. Exact color match must be provided.


Packaging

1 Gallon

5 Gallon


Cem-Seal Pigmented SDS

Cem-Seal SDS