Ready-Mix Products

S-1800 SUPER-STAMP® GRAY 

S-1800 Super-Stamp® Gray and S-1801 Super-Stamp® White are single-component, cementitious products designed to create the look of natural stone, and any other desirable textures over existing concrete. Super-Stamp is a ready-mixed proprietary blend of a specially modified water-resistant, acrylic co-polymer resin mixed with various sized aggregates formulated to maintain a 1/4″ thick profile that can be stamped or textured using specially designed tools and templates.

Super-Stamp eliminates the need to remove and replace concrete whether new or old while beautifying and increasing curb appeal. Super-Stamp is a revolutionary 1/4″ overlay system, because other 1/4″ overlay systems require a “wet-on-wet’ application.

Super-Stamp does not require the use of a bond coat or primer. S-9500 Color Stain™ can be applied over the finished stamped product to create a natural look that resembles true stone, or a custom colored appearance. Super-Stamp is available in White and Gray. For detailed Stamp Overlay application instruction, refer to the 1/4″ Stamp Overlay System. This product is designed to be a part of a system and is not intended to be used alone.

Colors & Finishes

Grey

Packaging

50 lb. Bag

1 Pallet (50 bags)

S-1800 Super-Stamp Gray SDS 2016

S-1800-Super-Stamp® Product Datasheet

S-1801 SUPER-STAMP® WHITE 

S-1800 Super-Stamp® Gray and S-1801 Super-Stamp® White are single-component, cementitious products designed to create the look of natural stone, and any other desirable textures over existing concrete. Super-Stamp is a ready-mixed proprietary blend of a specially modified water-resistant, acrylic co-polymer resin mixed with various sized aggregates formulated to maintain a 1/4″ thick profile that can be stamped or textured using specially designed tools and templates.

Super-Stamp eliminates the need to remove and replace concrete whether new or old while beautifying and increasing curb appeal. Super-Stamp is a revolutionary 1/4″ overlay system, because other 1/4″ overlay systems require a “wet-on-wet’ application. Super-Stamp does not require the use of a bond coat or primer.

S-9500 Color Stain™ can be applied over the finished stamped product to create a natural look that resembles true stone, or a custom colored appearance. Super-Stamp is available in White and Gray. For detailed Stamp Overlay application instruction, refer to the 1/4” Stamp Overlay System. This product is designed to be a part of a system and is not intended to be used alone.

Colors & Finishes

White

Packaging

50 lb. Bag

1 Pallet (50 bags)

S-1800-Super-Stamp® Product Datasheet

S-1801 Super-Stamp White SDS 2016

S-7000 UNDERLAYMENT™

S-7000 Underlayment™ is a dry, pre-blended, ready-mixed cementitious product which is mixed with water only and is used as a leveling, re-grading and sub-floor material over concrete and wood substrates.

S-7000 Underlayment provides a co-adhesive bond with the substrate and is fire and water resistant. S-7000 Underlayment can be installed in any thickness ranging from 0″-6″. It can achieve strengths of 8,500 psi, yet remain flexible and resilient.

S-7000 Underlayment is typically used for underlayment over existing concrete surfaces and above-grade wood decks. It is also used for structural repairs of bridges, parking structures and many other cementitious substrates.

Coverage Rate

Approximately 45 sq. ft/bag

Colors & Finishes

Gray Only

Packaging

50lb. Bag

1 Pallet

S-7000 Underlayment SDS 2016

S-7000 Underlayment™ Product Datasheet

S-9300 BOND-KOTE® GRAY

S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete!

Now you can texture Bond-Kote at 1/8”” thickness directly over properly prepared concrete substrates, and texture it to create the look of slate, stone, tile, brick or wood. This multi-use product has an extended pot life of several hours.

Bond-Kote was also the product used to create the famous pirate ship in Disney’s movie: “Pirates of the Caribbean: Dead Man’s Chest. The ship creators applied Bond-Kote directly over an existing 175 foot steel ship, and were impressed by its flexibility, its resistance to damage or deterioration after being submerged in salt water during the two year filming period of the movie, and their ability to easily create the appearance of aged wood with it. Apply by squeegee, gauge rake with 1/8″” cams, trowel, sprayer, brush or broom.

Coverage Rate

Coverages are approximations only. Actual coverage will vary depending on substrate conditions, application method and weather.

300 sq. ft. per bag @ 1/32″

50 sq. ft. per bag @ 1/8″

Colors & Finishes

Gray

Packaging

50 lb. Bag

50 lb. Bag in Pail

1 Pallet (50 bags)

0 Pallet (56 pails)

S-9300 Bond-Kote Gray SDS 2016

S-9300 Bond-Kote® Product Datasheet

S-9302 BOND-KOTE® WHITE

S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water!

Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete! Now you can texture Bond-Kote at 1/8”” thickness directly over properly prepared concrete substrates, and texture it to create the look of slate, stone, tile, brick or wood.

This multi-use product has an extended pot life of several hours. Bond-Kote was also the product used to create the famous pirate ship in Disney’s movie: “Pirates of the Caribbean: Dead Man’s Chest. The ship creators applied Bond-Kote directly over an existing 175 foot steel ship, and were impressed by its flexibility, its resistance to damage or deterioration after being submerged in salt water during the two year filming period of the movie, and their ability to easily create the appearance of aged wood with it. Apply by squeegee, gauge rake with 1/8″” cams, trowel, sprayer, brush or broom.

Coverage Rate

Coverages are approximations only. Actual coverage will vary depending on substrate conditions, application method and weather.

300 sq. ft. per bag @ 1/32″

50 sq. ft. per bag @ 1/8″

Colors & Finishes

White

Packaging

50 lb. Bag

50 lb. Bag in Pail

1 Pallet (50 bags)

0 Pallet (56 pails)

S-9300 Bond-Kote® Product Datasheet

S-9302 Bond-Kote White SDS 2016

S-9304 MICRO-BOND™ GRAY

S-9304 Micro-Bond Gray and S-9306 Micro-Bond White are made especially for micro-topping. This cementitious product contains extremely fine sands to create a smoother finish. Micro-Bond is the smart solution for repairing and resurfacing concrete interior floors, countertops, and decorative art surfaces. Micro-Bond is available in white and gray.

Coverage Rate

700 sq. ft./ per 50 lb. bag

Colors & Finishes

Gray

Packaging

50 lb. Bag

1 pallet (50 bags)

S-9304 Micro Bond Gray SDS 2016

S-9304 Micro-Bond™ Product Datasheet

S-9306 MICRO-BOND™ WHITE

S-9304 Micro-Bond Gray and S-9306 Micro-Bond White are made especially for micro-topping. This cementitious product contains extremely fine sands to create a smoother finish.

Micro-Bond is the smart solution for repairing and resurfacing concrete interior floors, countertops, and decorative art surfaces. Micro-Bond is available in white and gray.

Coverage Rate

700 sq. ft./ per 50 lb. bag

Colors & Finishes

White

Packaging

50 lb. Bag

1 pallet (50 bags)

S-9304 Micro-Bond™ Product Datasheet

S-9306 Micro Bond White SDS

S-9600 STRUCTURAL MIX™

Super-Krete S-9600 Structural Mix is a dry, pre-blended, ready-mixed cementitious product which is mixed with water, and used for the repair of structurally damaged concrete substrates.

Structural Mix provides a co-adhesive bond with the substrate and provides a compressive strength of 8,500 psi while retaining flexibility to allow for structure movement and to resist cracking at the contact point.

Structural Mix can be installed from zero inches to any thickness in a flowable or dry pack consistency. Structural Mix is used for repairing structural failures, for re-leveling and re-grading, and for both thin- or deep-fill overlayments.

Structural Mix is used for structural repairs of bridges, parking structures and many other cementitious substrates. Structural Mix can be applied by squeegee, trowel or screed.

Packaging

50lb. Bag

1 Pallet (50 bags)

S-9600 Structural Mix SDS 2016

S-9600 Structural Mix™ Product Datasheet