Architectural Sealers

TOUGH-SEAL™ 400 SYSTEM

Tough-Seal 400 is designed for use over concrete, acid-stained surfaces and various types of architectural concrete. It performs exceptionally as a paver sealer. Tough-Seal 250 is especially suitable over acid-stained concrete because it is unaffected by pH drifts that can impact the adhesion of other types of sealer systems.

When used over acid stains or integrally colored concrete, Tough-Seal 250 provides color enhancements similar to solvent acrylic sealers. When used as a finish coat in vehicle areas, it resists tire tracking and provides easy soil release. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete. Tough-Seal 250 is UV stable and suitable for exterior applications. A low-VOC formulation is available.

Tough-Seal™ 400 Application Instructions
Tough-Seal™ 400 System Datasheet
Tough-Seal™ 400 System Specification

TOUGH-SEAL™ 250 SYSTEM

The Tough-Seal 250 Sealer System is designed for use over concrete, acid-stained surfaces and various types of architectural concrete. It performs exceptionally as a paver sealer. Tough-Seal 250 is especially suitable over acid-stained concrete because it is unaffected by pH drifts that can impact the adhesion of other types of sealer systems.

When used over acid stains or integrally colored concrete, Tough-Seal 250 provides color enhancements similar to solvent acrylic sealers. When used as a finish coat in vehicle areas, it resists tire tracking and provides easy soil release. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete.

Tough-Seal™ 250 Application Instructions
Tough-Seal™ 250 System Datasheet
Tough-Seal™ 250 System Specification

TOUGH-SEAL™ 25 SYSTEM

Tough-Seal 25 is a clear, solvent-based acrylic coating system designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces.

Tough-Seal 25 contains Acryseal, which is based on a hard acrylic polymer that produces coatings with good gloss, stain-resistance and cleanability. Adhesion to properly prepared cementitious surfaces is excellent, and it’s completely non-yellowing. Tough-Seal 25 is easy to install and economical. A low-VOC formulation is available.

Tough-Seal 25 – Application Instructions
Tough-Seal 25 Sealer System Specification
Tough-Seal 25 System Sheet

TOUGH-SEAL™ 100 SYSTEM

Tough-Seal 100 System is designed for use over concrete, acid stained surfaces and various types of architectural concrete in high-traffic environments. It’s especially suitable over acid stained concrete because it is unaffected by pH drifts that can impact the adhesion of other types of sealer systems.

When used over acid stains or integrally colored concrete, Tough-Seal 100 gives color enhancement similar to solvent acrylic sealers. When used as a finish coat in vehicle areas, it resists tire tracking and provides easy soil release. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete. Tough-Seal 100 is UV stable and offers unmatched chemical and abrasion resistance. A low- VOC formulation is available.

SK-P100 PART A
Tough-Seal™ 100 Application Instructions
Tough-Seal™ 100 System Datasheet
Tough-Seal™ 100 System Specification

TOUGH-SEAL™ WB 501 SYSTEM

Tough-Seal WB 501 sealer system is designed for use over interior conventional and architectural concrete surfaces. This system consists of a fast-curing, two-component water-based epoxy primer and a finish coat of a high-performance, two-component water-based polyurethane coating. It is an excellent choice when a low odor, high-performance sealer system is required.

With respects to chemical and abrasion resistance, it is equal to or superior to other commercial solvent-based systems on the market today. Tough-Seal WB 501 will produce only a slight darkening of the substrate to which it is applied, making it ideal for applications where the traditional “color pop” or “wet look” of a solvent system is not desired. Due to its high level of chemical resistance, it is ideal for automotive areas. Additionally, it has tire stain resistance equal to conventional solvent-based polyurethane systems. A low-VOC formulation is available.

Tough-Seal™ 501 WB System Specification
Tough-Seal™ WB 501 Application Instructions
Tough-Seal™ WB 501 System Datasheet

SUPRA-SEAL™ SYSTEM

Supra-Seal System is a clear, solvent-based acrylic coating system designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces.

Tough-Seal 25 contains 8400 Supra-Seal™ PLUS, which is based on a hard acrylic polymer that produces coatings with good gloss, stain-resistance and cleanability. Adhesion to properly prepared cementitious surfaces is excellent, and it’s completely non-yellowing. Supra-Seal System is easy to install and economical. A low-VOC formulation using 8350 Supra-Seal VOC is available.

Supra-Seal™ System Application Instructions
Supra-Seal™ System Datasheet