Industrial hand-held bottom feed sprayer designed especially for use with acetone for use with Super-Krete Concrete Dye as well as our Liquid Dye.
Hands down the best sprayer on the market for decorative concrete dyes, graffiti removal, overspray cleanup, etc. Includes anti-drip system, pressure relief valve and built-in tire valve for quick pressurizing by compressor.
Tank Working Capacity: 2.4 gal
Working Pressure: 36 psi
This Gauge Rake is designed to rake out Super-Krete Overlay Materials at 1/4″ (Super-Stamp, Stamp-Kote) or 1/8″ (Bond-Kote) evenly across the surface to be stamped to ensure the proper depth of material is applied.
Gauge Rake must be set with the appropriate CAMS for achieving the desired thickness. 1/4″ and 1/8″ CAMS are available. The lines formed in the material by Gauge Rake are to be removed by Super-Krete Flex Smoother.
Super-Krete S-1800 Squeegee is specifically designed with the contractor in mind. This Squeegee eliminates the need for troweling; a great tool for use with Bond-Kote and Micro-Bond.
Super-Krete Squeegee’s durable 60 durometer, extruded neoprene blade is clamped into the squeegee base making an extremely durable tool that will last contractor’s for years. The 22 degree blade angle allows the rubber to work on its side instead of on its edge promoting mark free coating with no edge marks.
It’s radius edge blade eliminates the frustrating break in period normal to standard slit rubber blades and provides a mark free finish from the start. This Squeegee has a heavier, stronger feel than most other standard squeegees.
The weight of the squeegee allows for an easier pull on the material so the applicator is not fighting the material as it is being applied. The clamp at the base of the squeegee allows the applicator to access hard to reach areas while maintaining strength and durability.
Super-Krete Flex Smoother is designed to be used with Super-Krete’s 1/4″ stamp overlay products, (Super-Stamp & Stamp-Kote) while standing to smooth the gauge rake lines formed by Super-Krete gauge rake when evenly spreading the stampable material over the surface at 1/4″, the surface is smoothed out, and becomes ready to be stamped.
This pH Pencil is used to detect alkali or acid residues and may be used to measure the pH of concrete to the nearest full pH value.
To measure the surface pH just wet the surface with distilled water. Stroke the surface with the pencil. Wait approximately 15 seconds and compare the resulting color change with the color chart. To advance pencil lead, simply turn the pencil top clockwise. Each pencil will give the user at least 100 tests.
1 test per kit