Polyurethane

SK-P100

SK-P100 is a two component, high solids aliphatic polyurethane. This product offers a remarkable combination of performance properties not found in other polymer coatings. SK-P100 produces protective films which are hard, flexible and very impact resistant. These coatings feature high abrasion and scratch resistance, exterior durability, easy soil release and excellent resistance to a broad range of chemicals. For exterior applications, a U.V. stabilizer package is incorporated to insure long term chalk resistance and gloss retention. A special accelerator is available when rapid project turnaround is required. SK-P100 has been designed as a high performance top coat in various protective coating and seamless flooring applications. It provides maximum cleanability and stain resistance when used as a finish coat in color chip flooring or epoxy-quartz flooring. This coating is ideally suited for clean-room floors, automotive repair facilities, aircraft hangars and other high wear areas requiring resistance to fuels and chemicals. When used as a finish coat in wall coating systems, anti-graffiti properties are greatly enhanced.

 

Colors & Finishes

  • Bone

  • Flaxen

  • Wheat

  • Sand

  • Buff

  • Thatch Brown

  • Adobe

  • Red Brick

  • Seattle Red

  • Concrete Gray

  • Delta Fog

  • Sterling

  • Slate

  • Safety Yellow

  • Safety Red

  • Safety Blue

  • Gloss Finish

  • Satin Finish


Packaging

  • 1 1/2 Gallons

  • 15 Gallons

SK-P100 CLEAR UVR BLEND

Polyurethane UV absorber package designed to improve exterior durability. For use with clear product.

Packaging

  • 4 oz.

  • 20 oz.

SK-P100 PIGMENTED UVR BLEND

Polyurethane UV absorber package designed to improve exterior durability. For use with pigmented product.


Packaging

  • 2.5 oz.

  • 12.5 oz.

SK-P100 VOC

SK-P100 VOC is a two component, high solids aliphatic polyurethane formulated to comply with California V.O.C. regulations. This product offers a remarkable combination of performance properties not found in other polymer coatings. SK-P100 VOC produces protective films which are hard, flexible and very impact resistant. These coatings feature high abrasion and scratch resistance, exterior durability, easy soil release and excellent resistance to a broad range of chemicals. For exterior applications, a U.V. stabilizer package is incorporated to ensure long term chalk resistance and gloss retention. A special accelerator is available when rapid project turnaround is required. SK-P100 VOC has been designed as a high performance top coat in various protective coating and seamless flooring applications. It provides maximum cleanability and stain resistance when used as a finish coat in color chip flooring or epoxy-quartz flooring. This coating is ideally suited for clean-room floors, automotive repair facilities, aircraft hangars and other high wear areas requiring resistance to fuels and chemicals. When used as a finish coat in wall coating systems, anti-graffiti properties are greatly enhanced.

Colors & Finishes

  • Bone

  • Flaxen

  • Wheat

  • Sand

  • Buff

  • Thatch Brown

  • Adobe

  • Red Brick

  • Seattle Red

  • Concrete Gray

  • Delta Fog

  • Sterling

  • Slate

  • Safety Yellow

  • Safety Red

  • Safety Blue

  • Gloss Finish

  • Satin Finish

Packaging

1 1/2 Gallons

15 Gallons

SK-P250 VOC

SK-P250 VOC is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of surfaces. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete.

SK-P250 VOC is U.V. stable for use in exterior applications, cures rapidly, and is easily recoated with both solvent-based and water-based polyurethanes. When used as a finish coat, this material gives a hard, high gloss surface that offers excellent stain resistance and easy cleanability. Compared to solvent-based acrylic sealers, SK-P250 VOC offers substantial improvements in initial gloss, gloss retention and overall performance. SK-P250 VOC is available in a satin finish if a lower gloss is desired.


A special version of this material is available to meet the 50 grams/liter VOC limit in California. SK-P250 VOC has been designed for use over concrete, acid stained surfaces, and various types of architectural concrete. Its performance as a paver sealer is unexcelled. It is especially suitable over acid stained concrete because it is unaffected by pH drifts that can affect the adhesion of other types of primers.


When used over acid stains or integrally colored concrete, it gives color enhancement similar to solvent acrylic sealers. SK-P250 VOC can also be used as a tie coat over difficult to adhere to surfaces such as polyester urethane and solvent based acrylic sealers. When used as a finish coat in vehicle areas, it resists tire tracking and provides easy soil release. Although abrasion resistance to heavy foot traffic far exceeds single component materials, the best performance in these areas is achieved with polyester urethanes such as SK-P100, SK-P100 VOC or SK-P501.


Colors & Finishes

Clear

Satin Finish


Packaging

1.5 Gallons

15 Gallons


SK-P250 VOC Part A

SK-P250 VOC Part B

SK-P250 VOC Product Datasheet

SK-P501

SK-P501 is a high solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems. SK-P501 meets the 50 grams per liter California VOC limits. It offers substantial performance improvements over first generation catalyzed water-based polyurethanes, including higher film build capabilities, improved chemical resistance and resistance to hot tire staining. SK-P501 gives hard, durable coatings that feature good gloss, easy cleanability and superior abrasion resistance. Resistance to yellowing from U.V. light is excellent. For exterior desert applications, a special U.V. absorber package can be incorporated to ensure long-term chalk resistance and gloss retention. SK-P501 has been developed as a high performance finish coat for various seamless flooring, coating, and architectural concrete applications where odor cannot be tolerated. It is the ideal top coat for areas that require maximum gloss retention, ease of cleaning, and resistance to heavy foot traffic. Typical areas of application would include clean rooms, hospitals, concrete counter tops and high traffic retail areas. SK-P501 is also suitable for aircraft hangars, automotive repair facilities and garage floors.

Colors & Finishes

  • Bone

  • Flaxen

  • Wheat

  • Sand

  • Buff

  • Thatch Brown

  • Adobe

  • Red Brick

  • Seattle Red

  • Concrete Gray

  • Delta Fog

  • Sterling

  • Slate

  • Safety Yellow

  • Safety Red

  • Safety Blue

  • Gloss Finish

  • Satin Finish

Packaging

  • 1 1/2 Gallons

  • 15 Gallons

SK-P501 UVR BLEND

Polyurea UV absorber package designed to improve exterior durability.

Packaging

  • 3 oz.

  • 15 oz.