Epoxy

SK-E400 UVR BLEND

Epoxy UV absorber package designed to improve exterior durability.


Packaging

4.32 oz.

21.6 oz.

SK-E550

SK-E550 is a high solids, low odor material designed as a base coat for color chip flooring. SK-E550 is formulated with an unusually high pigment loading for excellent substrate hide in a one coat application. This allows the contractor to omit the normally used primer and saves a trip to the jobsite.



SK-E550 adheres tenaciously to damp or dry concrete and gives the contractor ample open time for broadcasting the color chips. The material is formulated with low odor glycol ether solvents that are considerably less hazardous than conventional aromatic or ketone solvents.


Colors & Finishes

• Bone • Flaxen • Wheat • Sand • Buff • Thatch Brown • Adobe • Red Brick • Seattle Red • Concrete Gray • Delta Fog • Sterling • Slate • Safety Yellow • Safety Red • Safety Blue


Packaging

1 Gallon

10 Gallons


SK Standard Color Chart

SK-E550 Part A

SK-E550 Part B Pig

SK-E550 Product Datasheet

SK-E200

SK-E200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete.



SK-E200 was designed for use as a fast curing primer under epoxy, acrylic, polyurethane and polyurea materials. It may also be used as a base coat in fast turnaround color chip systems. Re-coat times range from 30 minutes to 90 minutes depending on film thickness, curing conditions and the type of top coat used.



SK-E200 is ideally suited as a primer over properly neutralized interior acid stains where odor cannot be tolerated.



SK-E200 primer with SK-P100 or SK-P501 top coats may be accomplished in one trip to the job site. Fewer trips to the job site result in reduction of labor costs.


Colors & Finishes

• Bone • Flaxen • Wheat • Sand • Buff • Thatch Brown • Adobe • Red Brick • Seattle Red • Concrete Gray • Delta Fog • Sterling • Slate • Safety Yellow • Safety Red • Safety Blue • Clear


Packaging

1.5 Gallons

15 Gallons


SK Standard Color Chart

SK-E200 Part A

SK-E200 Part B

SK-E200 Product Datasheet

SK-E100

SK-E100 is a two component water-based epoxy system that features ease of application, very low odor and excellent overall coating performance.



This material cures blush free over a wide range of temperatures and adheres tenaciously to a variety of substrates including damp or wet concrete. Because of its affinity for moisture and inherent alkalinity resistance, SK-E100 may be used over green concrete with proper surface preparation.



SK-E100 is used as a general purpose coating for concrete floors and as a primer under epoxy, polyurethane and acrylic materials. The raw material package has a 30 year history of success as a concrete coating.



SK-E100 is recommended for coating warehouse and factory floors, automotive repair facilities, residential garage floors and many other commercial and industrial maintenance applications.


Colors & Finishes

• Bone • Flaxen • Wheat • Sand • Buff • Thatch Brown • Adobe • Red Brick • Seattle Red • Concrete Gray • Delta Fog • Sterling • Slate • Safety Yellow • Safety Red • Safety Blue • Gloss Finish • Satin Finish


Packaging

1.5 Gallons

15 Gallons


SK Standard Color Chart

SK-E100 Part A

SK-E100 Part A Pigmented

SK-E100 Part B

SK-E100 Product Datasheet

EPOXY PIGMENT PACKS

Pre-measured epoxy pigment packs designed to be added to SK-E300 and SK-E400.


Colors:

Available in all 16 Standard Colors


Epoxy Color Pack

Sk Standard Color Chart