Decorative Overlays

S-9306 MICRO-BOND™ WHITE

S-9304 Micro-Bond Gray and S-9306 Micro-Bond White are made especially for micro-topping. This cementitious product contains extremely fine sands to create a smoother finish. Micro-Bond is the smart solution for repairing and resurfacing concrete interior floors, countertops, and decorative art surfaces. Micro-Bond is available in white and gray.


Coverage Rate

700 sq. ft./ per 50 lb. bag


Colors & Finishes

White


Packaging

50 lb. Bag

1 pallet (50 bags)


S-9304 Micro-Bond™ Product Datasheet

S-9306 Micro Bond White SDS

S-1801 SUPER-STAMP® WHITE

S-1800 Super-Stamp® Gray and S-1801 Super-Stamp® White are single-component, cementitious products designed to create the look of natural stone, and any other desirable textures over existing concrete.


Super-Stamp is a ready-mixed proprietary blend of a specially modified water-resistant, acrylic co-polymer resin mixed with various sized aggregates formulated to maintain a 1/4″ thick profile that can be stamped or textured using specially designed tools and templates.


Super-Stamp eliminates the need to remove and replace concrete whether new or old while beautifying and increasing curb appeal. Super-Stamp is a revolutionary 1/4″ overlay system, because other 1/4″ overlay systems require a “wet-on-wet’ application.


Super-Stamp does not require the use of a bond coat or primer. S-9500 Color Stain™ can be applied over the finished stamped product to create a natural look that resembles true stone, or a custom colored appearance. Super-Stamp is available in White and Gray. For detailed Stamp Overlay application instruction, refer to the 1/4” Stamp Overlay System. This product is designed to be a part of a system and is not intended to be used alone.


Colors & Finishes

White


Packaging

50 lb. Bag

1 Pallet (50 bags)


S-1800-Super-Stamp® Product Datasheet

S-1801 Super-Stamp White SDS 2016

S-1800 SUPER-STAMP® GRAY

S-1800 Super-Stamp® Gray and S-1801 Super-Stamp® White are single-component, cementitious products designed to create the look of natural stone, and any other desirable textures over existing concrete. Super-Stamp is a ready-mixed proprietary blend of a specially modified water-resistant, acrylic co-polymer resin mixed with various sized aggregates formulated to maintain a 1/4″ thick profile that can be stamped or textured using specially designed tools and templates.


Super-Stamp eliminates the need to remove and replace concrete whether new or old while beautifying and increasing curb appeal. Super-Stamp is a revolutionary 1/4″ overlay system, because other 1/4″ overlay systems require a “wet-on-wet’ application. Super-Stamp does not require the use of a bond coat or primer.


S-9500 Color Stain™ can be applied over the finished stamped product to create a natural look that resembles true stone, or a custom colored appearance.


Super-Stamp is available in White and Gray. For detailed Stamp Overlay application instruction, refer to the 1/4″ Stamp Overlay System. This product is designed to be a part of a system and is not intended to be used alone.


Colors & Finishes

Grey


Packaging

50 lb. Bag

1 Pallet (50 bags)


S-1800 Super-Stamp Gray SDS 2016

S-1800-Super-Stamp® Product Datasheet

S-1710 LIQUID RELEASE AGENT™

S-1710 Liquid Release Agent is designed to make applying textures to concrete easy and error-free while extending stamping tool life.S-1710 Liquid Release Agent acts as a lubricant and conditioner to keep tools clean.


Coverage Rate

Approximately 300 sq. ft. per gallon


Packaging

Gallon Bottle

5 Gallon Pails

5 Gallon Drum

1 Pallet


S-1710 Liquid Release Agent™ Product Datasheet

S-1710 Liquid Release SDS

S-9304 MICRO-BOND™ GRAY

S-9304 Micro-Bond Gray and S-9306 Micro-Bond White are made especially for micro-topping. This cementitious product contains extremely fine sands to create a smoother finish. Micro-Bond is the smart solution for repairing and resurfacing concrete interior floors, countertops, and decorative art surfaces. Micro-Bond is available in white and gray.


Coverage Rate

- 700 sq. ft./ per 50 lb. bag


Colors & Finishes

- Gray


Packaging

- 50 lb. Bag

- 1 pallet (50 bags)


  S-9304 Micro Bond Gray SDS 2016

  S-9304 Micro-Bond™ Product Datasheet 

S-9302 BOND-KOTE® WHITE

S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete! Now you can texture Bond-Kote at 1/8”" thickness directly over properly prepared concrete substrates, and texture it to create the look of slate, stone, tile, brick or wood. This multi-use product has an extended pot life of several hours. Bond-Kote was also the product used to create the famous pirate ship in Disney’s movie: “Pirates of the Caribbean: Dead Man’s Chest. The ship creators applied Bond-Kote directly over an existing 175 foot steel ship, and were impressed by its flexibility, its resistance to damage or deterioration after being submerged in salt water during the two year filming period of the movie, and their ability to easily create the appearance of aged wood with it. Apply by squeegee, gauge rake with 1/8"” cams, trowel, sprayer, brush or broom.


Coverage Rate

Coverages are approximations only. Actual coverage will vary depending on substrate conditions, application method and weather.


- 300 sq. ft. per bag @ 1/32"

- 50 sq. ft. per bag @ 1/8"


Colors & Finishes

- White


Packaging

- 50 lb. Bag

- 50 lb. Bag in Pail

- 1 Pallet (50 bags)

- 0 Pallet (56 pails)


  S-9300 Bond-Kote® Product Datasheet

  S-9302 Bond-Kote White SDS 2016

S-9300 BOND-KOTE® GRAY

S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete! Now you can texture Bond-Kote at 1/8”" thickness directly over properly prepared concrete substrates, and texture it to create the look of slate, stone, tile, brick or wood. This multi-use product has an extended pot life of several hours. Bond-Kote was also the product used to create the famous pirate ship in Disney’s movie: “Pirates of the Caribbean: Dead Man’s Chest. The ship creators applied Bond-Kote directly over an existing 175 foot steel ship, and were impressed by its flexibility, its resistance to damage or deterioration after being submerged in salt water during the two year filming period of the movie, and their ability to easily create the appearance of aged wood with it. Apply by squeegee, gauge rake with 1/8"” cams, trowel, sprayer, brush or broom.


Coverage Rate

Coverages are approximations only. Actual coverage will vary depending on substrate conditions, application method and weather.


-300 sq. ft. per bag @ 1/32"

- 50 sq. ft. per bag @ 1/8"


Colors & Finishes

- Gray


Packaging

-50 lb. Bag

-50 lb. Bag in Pail

-1 Pallet (50 bags)

-0 Pallet (56 pails)


  S-9300 Bond-Kote Gray SDS 2016

  S-9300 Bond-Kote® Product Datasheet