Countertops

SK-P250 VOC

SK-P250 VOC is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of surfaces. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete.

SK-P250 VOC is U.V. stable for use in exterior applications, cures rapidly, and is easily recoated with both solvent-based and water-based polyurethanes. When used as a finish coat, this material gives a hard, high gloss surface that offers excellent stain resistance and easy cleanability. Compared to solvent-based acrylic sealers, SK-P250 VOC offers substantial improvements in initial gloss, gloss retention and overall performance. SK-P250 VOC is available in a satin finish if a lower gloss is desired.


A special version of this material is available to meet the 50 grams/liter VOC limit in California. SK-P250 VOC has been designed for use over concrete, acid stained surfaces, and various types of architectural concrete. Its performance as a paver sealer is unexcelled. It is especially suitable over acid stained concrete because it is unaffected by pH drifts that can affect the adhesion of other types of primers.


When used over acid stains or integrally colored concrete, it gives color enhancement similar to solvent acrylic sealers. SK-P250 VOC can also be used as a tie coat over difficult to adhere to surfaces such as polyester urethane and solvent based acrylic sealers. When used as a finish coat in vehicle areas, it resists tire tracking and provides easy soil release. Although abrasion resistance to heavy foot traffic far exceeds single component materials, the best performance in these areas is achieved with polyester urethanes such as SK-P100, SK-P100 VOC or SK-P501.


Colors & Finishes

Clear

Satin Finish


Packaging

1.5 Gallons

15 Gallons


SK-P250 VOC Part A

SK-P250 VOC Part B

SK-P250 VOC Product Datasheet

S-9500 SERIES COLOR STAIN™

S-9500 Color Stain achieves a decorative acid stain look without the hazard or special handling. S-9500 Color Stain is a water-based, penetrating, non-acidic, acrylic/urethane emulsion that creates a natural look on new and existing surfaces. S-9500C olor Stain is durable and protective. It can be brushed, sprayed or sponged on to create even, mottled, or marbleized effects. Color Stain is available in 20 standard colors. Custom Colors are available upon request. S-9500 Color Stain is an easy application and requires a water clean-up.


Colors & Finishes

• White • Light Cream • San Diego Buff • Yuma Sand • Beige Cream • Desert Tan • Caramel • Yellow • Terra Cotta • Mojave Dust • Pink • Baja Red • Red • Coast Blue • Green • Walnut • Concrete Gray • French Gray • Gray • Black


Packaging

2 oz. Sample Bottle

1 Gallon Bottle

5 Gallon Pail

55 Gallon Drum

1 Pallet (36 pails)


S-9304 Micro-Bond™ Product Datasheet

S-9304 MICRO-BOND™ GRAY

S-9304 Micro-Bond Gray and S-9306 Micro-Bond White are made especially for micro-topping. This cementitious product contains extremely fine sands to create a smoother finish. Micro-Bond is the smart solution for repairing and resurfacing concrete interior floors, countertops, and decorative art surfaces. Micro-Bond is available in white and gray.



Coverage Rate

700 sq. ft./ per 50 lb. bag

Colors & Finishes

Gray


Packaging

50 lb. Bag 

1 pallet (50 bags)


S-9304 Micro Bond Gray SDS 2016

S-9306 MICRO-BOND™ WHITE

S-9304 Micro-Bond Gray and S-9306 Micro-Bond White are made especially for micro-topping. This cementitious product contains extremely fine sands to create a smoother finish. Micro-Bond is the smart solution for repairing and resurfacing concrete interior floors, countertops, and decorative art surfaces. Micro-Bond is available in white and gray.


 

Coverage Rate

700 sq. ft./ per 50 lb. bag


Colors & Finishes

White


Packaging

50 lb. Bag

1 pallet (50 bags)


S-9302 BOND-KOTE® WHITE

S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete! Now you can texture Bond-Kote at 1/8”" thickness directly over properly prepared concrete substrates, and texture it to create the look of slate, stone, tile, brick or wood. This multi-use product has an extended pot life of several hours. Bond-Kote was also the product used to create the famous pirate ship in Disney’s movie: “Pirates of the Caribbean: Dead Man’s Chest. The ship creators applied Bond-Kote directly over an existing 175 foot steel ship, and were impressed by its flexibility, its resistance to damage or deterioration after being submerged in salt water during the two year filming period of the movie, and their ability to easily create the appearance of aged wood with it. Apply by squeegee, gauge rake with 1/8"” cams, trowel, sprayer, brush or broom.

 

Coverage Rate

Coverages are approximations only. Actual coverage will vary depending on substrate conditions, application method and weather.

300 sq. ft. per bag @ 1/32" 

50 sq. ft. per bag @ 1/8"


Colors & Finishes

White


Packaging

50 lb. Bag

50 lb. Bag in Pail

1 Pallet (50 bags)

0 Pallet (56 pails)