All Products


Shoe-in spiked shoes for resinous coatings including stamp overlays.

Key Features:

No buckles or straps

Slips on in seconds

Fits over boots or sneakers

Wide-base for stability

Snug fit whether standing or kneeling

Available Sizes:





Industrial hand-held bottom feed sprayer designed especially for use with acetone for use with Super-Krete Concrete Dye as well as our Liquid Dye.

Hands down the best sprayer on the market for decorative concrete dyes, graffiti removal, overspray cleanup, etc. Includes anti-drip system, pressure relief valve and built-in tire valve for quick pressurizing by compressor.

Tank Working Capacity: 2.4 gal

Working Pressure: 36 psi


This Gauge Rake is designed to rake out Super-Krete Overlay Materials at 1/4″ (Super-Stamp, Stamp-Kote) or 1/8″ (Bond-Kote) evenly across the surface to be stamped to ensure the proper depth of material is applied.

Gauge Rake must be set with the appropriate CAMS for achieving the desired thickness. 1/4″ and 1/8″ CAMS are available. The lines formed in the material by Gauge Rake are to be removed by Super-Krete Flex Smoother.


1/8″ CAM

1/4″ CAM

S-18000 24″ SQUEEGEE™

Super-Krete S-1800 Squeegee is specifically designed with the contractor in mind. This Squeegee eliminates the need for troweling; a great tool for use with Bond-Kote and Micro-Bond.

Super-Krete Squeegee’s durable 60 durometer, extruded neoprene blade is clamped into the squeegee base making an extremely durable tool that will last contractor’s for years. The 22 degree blade angle allows the rubber to work on its side instead of on its edge promoting mark free coating with no edge marks.

It’s radius edge blade eliminates the frustrating break in period normal to standard slit rubber blades and provides a mark free finish from the start. This Squeegee has a heavier, stronger feel than most other standard squeegees.

The weight of the squeegee allows for an easier pull on the material so the applicator is not fighting the material as it is being applied. The clamp at the base of the squeegee allows the applicator to access hard to reach areas while maintaining strength and durability.


Super-Krete Flex Smoother is designed to be used with Super-Krete’s 1/4″ stamp overlay products, (Super-Stamp & Stamp-Kote) while standing to smooth the gauge rake lines formed by Super-Krete gauge rake when evenly spreading the stampable material over the surface at 1/4″, the surface is smoothed out, and becomes ready to be stamped.


This pH Pencil is used to detect alkali or acid residues and may be used to measure the pH of concrete to the nearest full pH value.

To measure the surface pH just wet the surface with distilled water. Stroke the surface with the pencil. Wait approximately 15 seconds and compare the resulting color change with the color chart. To advance pencil lead, simply turn the pencil top clockwise. Each pencil will give the user at least 100 tests.


1 test per kit


The original magic trowel

Smooths the surface of applied cementitious overlays 

Great for overlays of a more fluid consisitency 

An effective finishing tool capable of creating a flawless surface 

Threaded handle adapter





Super Base Neutralizer is a concentrated alkaline solution for neutralizing after etching or acid staining. This product has no odor and is more effective than ammonia.



1 Gallon


Super-Krete® Super-Grit™ is a polymeric grit coating additive designed to prevent slippery conditions in any type of sealed finish, especially when the surface becomes wet. Super-Grit can be easily broadcast or mixed into sealer. Super-Grit can be used for interior and exterior applications, ramps and down-slopes. Unlike silica sand, Super-Grit does not sink when mixed into sealers, providing a more even appearance.

Super-Grit is clear, which will allow stained or painted surfaces to be completely visible, without loss of color, texture or definition. Super-Grit is environmentally friendly, VOC compliant, non-toxic and OSHA compliant (does not contain any ingredients required to be listed by OSHA CFR 1910-1200.

Mixing Information:

Mix 3-8 oz of Super-Grit to one gallon of sealer and mix mechanically for one minute to ensure proper suspension of material. An additional thin coat of sealer without Super-Grit may be applied over seal with Super-Grit to help trap the particles in the sealer and to provide ease of cleaning. If too much Super-Grit is added to the product or too much product is broadcast over the surface, discoloring or a white milky appearance may occur.


1 Quart

1 Gallon

S-8903 SUPER-GRIT SDS 2016

S-8903 Super-Grit™